96 GB/MT
properly attached. The battery will only be charged if this is the
case.
You can see the current charge level in the battery status display.
Normally the battery takes about 3 hours to fully charge. As soon
as the device‘s battery is fully charged, the word „FULL“ will appear
in the display.
Do NOT charge the Activity Sensor if the charging
contacts on the back of the device are wet. If necessary, carefully
pat the charging contacts dry with a cloth.
Functions
Overview of functions
The Activity Sensor has the following functions: time with date and battery
status, pedometer, calories burned, distance covered, move reminder, daily
goal, alarm, activity alert sleep mode and message / call notifications.
The values are reset to zero at midnight every 24 hours. Counting
restarts from zero.
To change between the individual functions, press the button
1
on the
Activity Sensor.
To Next Page
Loading...
