26 GB/MT
Introduction
Wireless Socket Set
Q
Introduction
Q
Proper handling
The radio-controlled socket set is suitable
for switching electrical equipment on and
off by remote control. Any alterations to
this device are not in accordance with
regulations and could represent signifi-
cant risk of accidents. The manufacturer
does not accept liability for any damage
caused through the device not being
used in accordance with the regulations.
This device is not intended for commercial
use.
Q
Scope of supply
After you have unpacked this set, please
check to make sure all the contents are
complete.
4 Remote controlled sockets
1 4-channel remote control
1 Button cell CR 2032, lithium 3 V
(for remote control)
1 Set of operating instructions
Q
Control elements
Remote control (fig. A):
1
Power indicator light
2
Channel ON / OFF button Channel
A, B, C, D
3
Master ON / OFF switch
4
Battery compartment lid
Legend of pictograms used
Volt (AC voltage) Caution! Fire hazard!
Hertz (frequency)
Do not dispose of electric
appliances in household
rubbish!
Watt (effective power)
Improper battery disposal
harms the environment!
Observe warnings and
safety instructions!
Micro-switch with contact
opening < 3 mm
Beware of electric shock!
Danger to life!
EU-compliant
To Next Page
Loading...
