■ 12
│
GB
│
IE
│
NI
SKHK 40 A1
Key Function
6
► Press briefly to play/pause the music.
5
► Press briefly to increase the volume. When
you reach the maximum volume you will
hear a beep.
► Press and hold to jump to the next track.
7
► Press briefly to decrease the volume. When
you reach the minimum volume,
you will hear a beep.
► Press and hold to jump back to start of the
track. Press and hold again within
2 seconds to jump to the previous track.
LED lights
The headphones have integrated LED lights 3 on both earpieces 2
allowing you greater visibility in the dark or in poor visibility.
NOTE
► The LED lights 3 are only functional if the headphones are in pair-
ing mode or connected via Bluetooth
®
to a playback device.
The LED lights 3 are not suitable for lighting rooms in
houses!
♦ Press the Bluetooth
®
pairing button
4 once briefly
to switch on the LED lights 3. The LED lights 3 light up
permanently.
♦ Press the Bluetooth
®
pairing button
4 again briefly.
The LED lights 3 flash.
♦ Press the Bluetooth
®
pairing button
4 again briefly
to switch off the LED lights 3.
Telephone functions
The following telephone functions are only available when the
headphones and the playback device are connected to each other
via Bluetooth
®
.
NOTE
► It is possible that not all functions will be supported depending
on the smartphone used and its operating system.
To Next Page
Loading...
