Silvercrest 331510 2001 - Filling While in Use; Selecting the Speed Setting

■ 62
│
GB
│
MT
SSTME 600 A1
6) Place the filled and closed blender 3 on the motor block 6. To do this, use
the recesses on the motor block 6 and ensure that the arrow T on the
blender is pointing to the
symbol while doing so. Turn the blender 3
clockwise to position
until it audibly engages. The motor cannot start until
the blender 3 is fitted flush.
Selecting the speed setting
Once the blender 3 is filled and sitting completely closed on the motor block 6,
you can switch on the appliance.
Set the switch 5 to …
■ Level 1 – 3
for liquids or soft foodstuffs, for mixing, blending and stirring
■ Level 3 – 5
for more solid foods or for chopping
■ Level P (pulse function)
for short, powerful impulse operation, e.g. for crushing ice cubes or when
cleaning. To prevent overloading the motor, the switch 5 does not lock in this
position. Therefore, hold the switch 5 in this position for short periods only.
NOTE
► Fill the blender 3 with a maximum of 180 g of ice cubes.
Otherwise, the ice cubes will not be crushed optimally.
Filling while in use
WARNING!
► If you want to add additional foods during operation, use only the measuring
cap 1 provided for this purpose. Do NOT open the lid 2.
► Do not insert cutlery items or mixing tools into the blender 3 while the
appliance is in use. There is a considerable risk of injury if these come into
contact with the swiftly rotating cutting blades 4!
To add more food while the appliance is in use, …
1) Remove the measuring cap 1 from the lid 2.
2) Add the ingredients.
3) Press the measuring cap 1 back into the lid.
IB_331510_SSTME600A1_LB5.indb 62 29.06.2020 15:51:34