GB
│
MT
│
63 ■
SSTME 600 A1
Removing the blender
Once you have finished processing the food in the attachment:
1) Always start by setting switch 5 to the off position (“0”) and pulling out the
mains plug.
2) Wait until the motor has come to a complete standstill before lifting the
blender 3 off the motor block 6. Rotate the blender 3 anticlockwise until
the arrow T under the blender handle is located above the
position.
Remove the blender 3 from the motor block 6 in a vertical, upward motion.
Useful tips
■ To achieve the best results when puréeing firm ingredients, add small amounts
one after the other into the blender 3 rather than a single large portion.
■ When processing firm ingredients, cut them into small pieces (2 – 3 cm).
■ When mixing liquid ingredients, start off with a small amount of liquid.
Gradually add more liquids to the mixture through the measuring cap.
■ The appliance can be stabilised by placing your hand on top of the closed
blender during operation.
■ For stirring solid or very thick liquid foods, it can be useful to use level P
to prevent the cutting blades 4 from blocking.
NOTE
► Do not use the appliance to grind crystals of cooking salt, refined sugar or
white sugar. For example, to make powdered sugar.
IB_331510_SSTME600A1_LB5.indb 63 29.06.2020 15:51:34
To Next Page
Loading...
