Silvercrest 359294 2010 - Battery Charging and Indicators

13 GB/IE/NI/CY
Before assembly, check whether
the assembly material provided
is suitable for your circumstances
(e.g. wall condition). If necessary,
consult a professional to procure
suitable mounting material.
Mark the drill holes using the holes in the wall
bracket
5
intended for the screws
6
.
Now drill the fastening holes in the wall and
put the wall plugs
7
into the holes.
Mount the wall bracket
5
with the screws
6
included in the delivery (see Fig. B). Ensure that
the wall bracket
5
is securely tightened.
Hang the main unit
4
with the back on the
hook on the wall bracket
5
intended for this
purpose (see Fig. C).
Charging the rechargeable
battery
Note: Charge the rechargeable battery
2
fully
(approx. 4 to 5 hours) prior to first use.
Hang up the main unit
4
with
aluminium suction tube
16
to
charge on the wall bracket
5
or
place it out of the reach of children
and pets in a protected location
where no one can trip over or
step on the main unit
4
with
aluminium suction tube or the
mains cable.
Insert the connection plug of the mains cable
9
into the charging socket
3
on the rechargeable
battery
2
(see Fig. D).
Insert the mains adapter
8
into the mains
socket. The LEDs on the rechargeable battery
control display
2b
show the charge level of the
rechargeable battery
2
(see chapter “Mean-
ing of the rechargeable battery control display”).
Note: During the charging process, the mains
adapter
8
may warm up. This is normal and
does not indicate that the product is defective.
Remove the mains adapter
8
from the mains
socket and the mains cable connector plug
9
from the charging socket
3
when the recharge-
able battery
2
is fully charged. The LEDs on
the rechargeable battery control display
2b
go
out.
Charging the rechargeable battery out-
side of the main unit:
Charge the rechargeable battery
2
in a protected location and
outside the reach of children
and pets.
You can remove the rechargeable battery
2
to charge it outside of the main unit
4
. Press
the release button
2a
and pull the rechargeable
battery
2
out of the holder on the handle
1
of the main unit
4
(see Fig. E).
Insert the mains cable connector plug
9
into
the charging socket
3
of the rechargeable
battery
2
(see Fig. F).
Insert the mains adapter
8
into the mains
socket. The LEDs on the rechargeable battery
control display
2b
show the charge level of the
rechargeable battery
2
(see chapter “Mean-
ing of the rechargeable battery control display”).
Once the rechargeable battery
2
is fully
charged, the LEDs on the rechargeable battery
control display
2b
light up continuously.
Remove the mains adapter
8
from the mains
socket and the mains cable connector plug
9
from the charging socket
3
of the rechargeable
battery
2
. The LEDs on the rechargeable bat-
tery control display
2b
go out.
Put the charged rechargeable battery
2
back
in the main unit
4
by pushing it into the holder
in the handle
1
of the main unit
4
until it
locks into place.