What to do if my Silvercrest 387993 2104 Iron is dripping water?
If your Silvercrest Iron is dripping water from the soleplate, it could be due to steam condensing in the hose during pauses in steam ironing. This is normal. To resolve this, hold the iron over a cloth or container and press the steam button until steam comes out instead of water. Also, ensure that the temperature setting is appropriate for steam ironing.
What to do if wet areas occur when ironing with Silvercrest 387993 2104 Iron?
Wet areas during ironing with your Silvercrest Iron can result from steam condensing on the ironing board. To resolve this, first wipe the ironing board dry. Then, iron the wet areas of the fabric without using steam until they are dry.
Why does my Silvercrest 387993 2104 leave wet spots?
Wet areas on the goods being ironed can be caused by steam condensing on the ironing board. To resolve this, first wipe any wet areas off the ironing board and then iron the wet areas on the fabric dry without steam.
What to do if water drips from my Silvercrest 387993 2104?
If water drips from the sole of your Silvercrest Iron, it's normal if steam ironing was paused briefly, causing steam to condense. Hold the iron over a cloth or container and press the steam button until steam comes out instead of water. Also, the set temperature might be too low for steam ironing; set a suitable temperature.
What to do if my Silvercrest 387993 2104 Iron doesn't produce steam?
If your Silvercrest Iron isn't producing enough steam, make sure there's enough water in the tank. If the water tank is empty, fill it with water. Also, ensure the iron has heated up sufficiently by waiting until the temperature indicator lamp goes out. Check that the temperature control is set within the appropriate range for steam ironing. If the steam unit hasn't been used recently, press and hold the steam button, as it may take a moment for the steam to discharge.
Why is my Silvercrest 387993 2104 not producing steam?
If your Silvercrest Iron isn't producing steam, it could be due to several reasons: * The water tank may be empty. Refill it with water. * The iron might not be hot enough. Wait for the temperature indicator light to turn off. * The temperature control could be set too low. Adjust it to a suitable range. * If the steam function hasn't been used recently, press and hold the steam button until steam comes out.
What to do if my Silvercrest Iron is not producing steam?
If your Silvercrest Iron isn't producing enough steam, several factors could be at play. First, ensure the water tank has enough water. If the tank is full, the iron may not be sufficiently heated; wait for the temperature indicator lamp to turn off. Also, check that the temperature control is set within the appropriate range for steam. Lastly, if the steam unit hasn't been used recently, press and hold the steam button, as it may take a moment for the steam to discharge.
General| Type | Steam Iron |
|---|---|
| Power | 2400 W |
| Voltage | 220-240 V |
| Frequency | 50-60 Hz |
| Water tank capacity | 320 ml |
| Steam boost | Yes |
| Anti-drip system | Yes |
| Anti-calc | Yes |
| Self-cleaning function | Yes |
| Weight | 1.2 kg |
To Next Page