Silvercrest BLUETOOTH SLB 10 A1 User Manual

SLB 10 A1
■ 90
│
GB
│
MT
♦ Activate the NFC function on your Bluetooth
®
device. A detailed
description of how to do this can be found in the operating instructions
for your Bluetooth
®
device.
♦ Hold the Bluetooth
®
device less than 1 cm from the NFC logo on the
top of the speaker. Alternatively, you can lay your Bluetooth
®
device
directly onto the NFC logo on the top of the speaker.
♦ Confirm the connection once the corresponding message appears on
the display of your Bluetooth
®
device.
♦ Your Bluetooth
®
device is automatically connected to the speaker via
Bluetooth
®
. You will hear a rising series of beeps, and the operating/
charging LED 9 flashes blue every 3seconds once the connection has
been successfully established.
You can now use the speaker to listen to music from your Bluetooth
®
device wirelessly.
IB_330701_SLB10A1_LB5.indb 90 30.06.2020 12:16:17

Silvercrest BLUETOOTH SLB 10 A1 Specifications

General

Brand	Silvercrest
Model	BLUETOOTH SLB 10 A1
Category	Speakers
Language	English