Silvercrest BLUETOOTH SLB 10 A1 - AUX IN Mode Limitations

SLB 10 A1
■ 96
│
GB
│
MT
NOTE
► If you connect the 3.5 mm jack cable r to the speaker during the
playback of audio files via Bluetooth
®
, it will switch playback
automatically to the AUX input. The Bluetooth
®
connection is also
stopped if you simply connect a 3.5 mm jack cable to the speaker.
► In AUX IN mode, it is not possible to use the
button 3 or button 5
to jump to the next/previous title. It is also not possible to use the
button 4 to start or pause music playback.
► If the speaker stops receiving a signal while in AUX IN mode, the
speaker will switch off automatically after 10minutes.
IB_330701_SLB10A1_LB5.indb 96 30.06.2020 12:16:18