SKOG 40 A1
GB
│
IE
│
7 ■
Music playback
♦ Connect the jack plug 4 of the audio cable 3 to the audio output (e.g.
headphone jack) on the playback device.
♦ Switch on the playback device and set the volume to minimum.
♦ Put on the headphones as described in the section Wearing the head-
phones.
♦ Set the desired volume on the playback device.
♦ Start playback on the playback device.
Multifunction button
Function
1 x brief press (during playback) Pause playback
1 x brief press (while paused) Continue playback
Press for about 2 seconds Start voice control
Telephone functions
NOTE
► It is possible that not all functions will be supported depending on the smart-
phone used and its operating system.
Making a call
♦ Use your smartphone to dial the required telephone number.
The call is automatically transferred to the headphones.
♦ Speak into the microphone
5 on the headphones to make your call.
Accepting/ending/rejecting a call
NOTE
► If you are listening to music and receive a call, you will hear the ringtone in
the headphones and playback is stopped. After finishing the call, playback
will be resumed automatically.
To Next Page
Loading...
