111
English
not change anything on the device for approximately five seconds). If you confirm the selection by pressing the control dial ,
you advance to the next possible setting. If you use automatic storage, the device will return to the standard display.
“TELVOL”: Standard volume for telephone conversations
The “TELVOL” function enables an adjustment of the volume for telephone conversations according to individual preferences.
To change the device’s volume for telephone conversations, press the control dial
until menu level 2 is reached. The “INVOL”
function will appear. Press the control dial
repeatedly until you get to the menu item “TELVOL”. Here you have the option of
setting the device’s volume for telephone conversations by turning the dial. Turning to the right increases the volume for
telephone conversations; turning to the left reduces the volume for telephone conversations. The volume for telephone
conversations can be set between 0-45. Here 0 = no sound and 45 = maximum volume of the device. The setting is saved
either when the desired value is confirmed by pressing the control dial
or through automatic storage (do not change anything
on the device for approximately five seconds). If you confirm the selection by pressing the control dial
, you advance to the
next possible setting. If you use automatic storage, the device will return to the standard display.
Note:
During a telephone conversation, it is possible to adjust the volume to the current requirements at any time by means of the
control dial
.
“DSP”: Sound settings – 4-band equaliser
In the “DSP” menu, you have the option of selecting between four different sound settings. The choices are between the sound
settings “CLASSIC”, ”ROCK”, ”POP” and ”FLAT”. Here you also have the option of deactivating the “DSP” function (“DSP
NONE”).
To select between the different sound settings, press the control dial until menu level 2 is reached. The “INVOL” function will
appear. Press the control dial repeatedly until you get to the menu item “DSP”. There you will have the option of selecting
between the different sound settings by turning the dial.
The setting is saved either when the desired value is confirmed by pressing the control dial
or through automatic storage (do
not change anything on the device for approximately five seconds). If you confirm the selection by pressing the control dial
,
you advance to the next possible setting. If you use automatic storage, the device will return to the standard display.
Note:
After selecting the sound setting, it will appear on the display of the device together with the message “DSP”.
“LOUD”: Sound setting – Loudness
The “LOUD” function makes it possible to emphasise low and high frequencies through the push of a button in order to increase
sound perception in an adjustment to the respective volume.
To Next Page
Loading...
