What to do if the function buttons are not functioning on my Silvercrest Car Receiver?
If the function buttons on your Silvercrest Car Receiver aren't working: * Press the RESET button in case of a device malfunction. * Check that the face plate is installed correctly.
What to do if my Silvercrest 75726 will not switch on?
If your Silvercrest Car Receiver won't switch on, there are a couple of things you can check. First, make sure the ignition is switched on by turning the key. If the ignition is on and the device still doesn't power up, the fuse might be defective and needs replacement.
Why is the radio and/or automatic station saving not functioning on my Silvercrest Car Receiver?
If the radio and/or automatic station saving isn't working on your Silvercrest Car Receiver, check that the antenna cable is correctly connected. If the connection is correct, the station signals may be too weak, in which case you should try setting the station manually.
What to do if my Silvercrest 75726 CD won't load or eject?
If your Silvercrest Car Receiver CD won't load or eject, consider these potential causes: * Ensure that a CD isn't already inserted. * Check that the CD is inserted with the inscribed side up. * The CD might be dirty or defective; try cleaning it or using a different CD. * If the temperature in the vehicle is too high, allow the vehicle to air out. * Condensation on the laser lens might be the issue; switch the device off for a few hours and then try again.
What to do if the card reading device does not read the cards on my Silvercrest Car Receiver?
If the card reading device on your Silvercrest Car Receiver isn't reading cards, check the card. Slide it in with the inscribed side facing to the right. Make sure that the data carrier has been formatted to the FAT32 file system. The card may also be defective or dirty.
Why does the CD jump when playing in my Silvercrest Car Receiver?
If the CD jumps while playing in your Silvercrest Car Receiver: * Correct the mounting angle if it exceeds 30°. * Clean the CD or insert a different CD if the CD is very dirty or defective.
Why is the radio and/or the automatic station saving not functioning on my Silvercrest 75726?
If the radio or automatic station saving is not functioning on your Silvercrest Car Receiver, check the antenna cable for a correct connection. If the station signals are too weak, try setting the station manually.
What to do if function buttons are not functioning on Silvercrest 75726?
If the function buttons on your Silvercrest Car Receiver aren't working, the device may have a malfunction. Try pressing the RESET button. Also, ensure that the face plate is correctly installed.
Why are the function buttons not working on my Silvercrest 75726?
If the function buttons aren't working, there may be a malfunction with the device; try pressing the RESET button. Also, ensure that the face plate is correctly installed.
Why is the Bluetooth connection not functioning on my Silvercrest 75726?
If the Bluetooth connection on your Silvercrest Car Receiver isn't functioning, it could be because your mobile phone doesn't support Bluetooth transmissions. Try reconnecting the mobile phone and the device. The mobile phone might not be coupled with the device.
General| Brand | SilverCrest |
|---|---|
| Model | 75726 |
| Category | Car Receiver |
| Bluetooth | Yes |
| USB Port | Yes |
| SD Card Reader | Yes |
| AUX Input | Yes |
| Display Type | LCD |
| Supported Audio Formats | MP3, WMA |
| Remote Control | Yes |
| Radio | FM |
To Next Page