14 GB/IE
Press the T-SET button
4
once in the clock mode or
twice in the weighing mode. A bell-symbol appears in the
LC display
5
.
Note: You can set the time period precisely to the second.
Press and hold the ▲Z / T button
7
or ▼UNIT button
6
,
so that the time readout in the LC display runs faster.
Press the ▲Z / T button or ▼UNIT button to set the time in
10 minute intervals.
Press the T-SET button once. Press the ▲Z / T button or
▼UNIT button to set the time in 1 minute intervals.
Press the T-SET button once. Press the ▲Z / T button or
▼UNIT button to set the time in 10 second intervals.
Press the T-SET button once. Press the ▲Z / T button or
▼UNIT button in set time in 1 second intervals.
Press the T-SET button to start the countdown.
Note: You can reset the timer. To do this press the T-SET
button.
A signal sounds as soon as set time period has elapsed.
Press any button to switch off the signal.
Switching off the weighing function
Note: If the appliance has not been used for about 2 minutes,
it switches automatically to the time mode.
Press the ON / OFF button
3
to return manually to the
time mode.
Temperature display
The temperature is shown in °C in the lower right of the
LC display
5
.
To Next Page
Loading...
