EasyManua.ls Logo

Silvercrest IAN 107261 - Troubleshooting; Troubleshooting Common Errors

Silvercrest IAN 107261
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15 GB/IE
Troubleshooting
If the LC display
5
shows “Err”, there is too much weight
on the appliance. Remove the excess load. Never place a
load of more than 5 kg onto the appliance.
If the LC display shows “Lo”, the batteries are discharged.
Change the batteries.
Note: The message “Lo” only appears in the weighing
mode.
If the LC display shows “UNST”, wait for a few seconds.
If the appliance does not work as expected, change the
batteries.
Note: The device contains delicate electronic components.
This means that if it is placed near an object that transmits
radio signals, it could cause interference. If the display in-
dicates a problem, move such objects away from it. Elec-
trostatic discharges can lead to malfunctions. In the case
of such malfunctions remove the batteries briefly and then
insert them again.
Cleaning, care and storage
Note: For storage you can hang the appliance using the
hanger
1
(see Fig. A).
Under no circumstances should you use liquids or detergents,
as these will damage the appliance.
The appliance should only be cleaned on the outside with
a soft, dry and lint-free cloth.
For stubborn dirt use a cloth with soapy water or stainless
steel cleaner.

Table of Contents

Related product manuals