7
SBTF 10 C2
GB
IE
Switching the hands-free
appliance on and off
Switching on: The appliance is switched off .
● Press and hold the multi-function button 6 for 3 seconds,
until a short and high signal tone is heard. The LED
status indicator 7 blinks twice every 3 seconds.
Switching off : The appliance is in standby mode.
● Press and hold the multi-function button 6 for 5 seconds,
until a long and deep signal tone is heard. The LED
status indicator 7 extinguishes.
Coupling the hands-free appliance
with a mobile telephone
The hands-free appliance has been especially developed
for mobile telephones that support the Bluetooth
®
Profi le
“Handsfree (HFP) and Headset (HSP)“. Further informa-
tion about Bluetooth
®
radio technology is to be found in
the operating instructions for your mobile telephone.
Before you can use the hands-free appliance, you must
connect it with a compatible mobile telephone (pairing).
● Check to make sure the mobile telephone is switched on.
● Programme the mobile telephone so that it searches
for Bluetooth
®
appliances. A detailed description of
how to do this is to be found in the operating instruc-
tions for your mobile telephone.
● Ensure that the hands-free appliance is correctly set up
and switched off .
● To switch the device off , press and hold the multi-function
button 6 for about 3 seconds. A long, low signal
tone will be heard and the LED status indicator 7
extinguishes.
● Position the hands-free appliance and the mobile tele-
phone so that they are not more than 1 metre away
from each other.
● Press and hold down the multi-function button 6 for 6
seconds until, after 3 seconds a short, high signal tone
IB_91621_SBTF10C2_LB3.indb 7IB_91621_SBTF10C2_LB3.indb 7 20.08.13 12:2220.08.13 12:22
To Next Page
Loading...
