11 Check in the operating manual of the television
whether additional settings must be configured on
the television.
Ô
On this topic, also refer to Section 9.5. "Configuring
the Video Output/ TV Mode".
7.5. Connecting the DVD Player to a
Video Projector
You can also connect the DVD player to a video pro-
jector instead of a television. Check the operating
manual of the video projector to determine which of
the described connection options are available.Any
additional cables required can be obtained from
audio/video stores.
8. Connecting Audio Compo-
nents to the DVD Player
Instead of the television speakers, the sound can also be
played back by external audio components.To accom-
plish this, HiFi systems, Dolby Digital/DTS receivers or
surround sound systems can be connected to the DVD
player.You have the following options here:
8.1. Connecting a HiFi System to the
DVD Player
Before connecting,check in the operating manual of
the HiFi system …
Ú
whether the HiFi system is suitable for connection
to a DVD player.
Ú
whether the HiFi system has RCA sockets. If this is
the case, you can connect the HiFi system to the
DVD player with RCA cables.
ô
Note:
If the audio/video RCA cable included with the DVD player
is already in use,you will need additional RCA cables.These
are available in audio/video stores.
To connect a HiFi system:
1 Insert the white RCA cable plug into the RCA sok-
ket FL on the DVD player.
2 Insert the second white RCA cable plug into the
RCA socket for the left channel on the HiFi
system.
3 Insert the red RCA cable plug into the RCA
socket FR on the DVD player.
4 Insert the second red RCA cable plug into the RCA socket
for the right channel on the HiFi system.
Fig. 7 Connecting a HiFi system via RCA cables
5 Check in the operating manual of the HiFi system
whether additional settings are required for connec-
tion to a DVD player.
ô
Note:
For optimal sound: Place the speakers of your HiFi
system to the left and right of the television.
If you have connected the DVD player to the television
with a Scart cable:The audio signals are transmitted to
the HiFi system over the RCA cables and to the televi-
sion over the Scart cable. In this case,set the volume of
the television to the lowest value.
8.2. Connecting Digital Audio Compo-
nents to the DVD Player
Digital audio components can be connected to the DVD play-
er either via digital or analog cables.
ô
Note:
The cables required for the connection options described
below are available at audio/video stores.
8.2.1. Connecting via Digital Cable
Check in the operating manual of the digital audio
component whether it can be connected to the DVD
player …
Ú
via a coaxial cable or
Ú
via an optical cable
If both options are available, you can freely decide
which connection option you prefer.
8.2.1.1. Connecting via Coaxial Cable
1 Insert the plug of the coaxial cable into the coaxial
socket on the DVD player.
13
To Next Page
Loading...
