- 17 -
NOTE:
This function is not available on all DVDs.
NOTE:
If you stopped playback by pressing the
"Stop" button
twice (playback stop without resume function) activation
of the main menu on the disc is not possible.
Playback Control (PBC) with VCDs/S-VCDs
Many VCDs/S-VCDs have playback control (in short "PBC").
playback control means a main menu, which allows for operation
of several functions of the VCD/S-VCD.
If PBC is available on the disc inserted into the DVD player
then you must first activate it in order to superimpose the
menu.
To activate PBC...
• During playback or while playback is stopped press the
button "Mode" on the remote control. The "Playback
Mode" menu will be superimposed on the television
screen:
• The menu option "Mode" is automatically selected first.
By pressing the button"OK" on the remote control you
can select between the options "Off", "Random" and
"PBC". Set to "PBC" and press the "Mode" button again.
The "Playback Mode" menu will fade out, PBC is now
switched on.
NOTE:
If you switch PBC on during playback it is possible that play-
back will stop then start again at the beginning.
• To superimpose the PBC main menu press the button
"Menu" on the remote control during playback.
Skip to beginning of chapter (Skip)
NOTE:
This function may not be available on all DVDs/VCDs/S-VCDs!
If you attempt to execute a function that is not available, the
symbol is displayed on the television screen.
With the
"Skip forward" and "Skip backwards" buttons
on the remote control or on the front panel of the device you
can manoeuvre inside the film on the inserted DVD/VCD/S-VCD
during playback...
• forwards to the beginning of the next chapter or
• skip backwards to the previous chapter
The chapter selected will immediately play back without the
necessity of pressing the
"Play" button. The number of
the selected chapter will show in the display on the front pa-
nel of the DVD player to the left of the played time indicator.
Entry of the title number via number keys
NOTE:
This function may not be available on all DVDs/VCDs/S-VCDs!
If you attempt to execute a function that is not available, the
symbol is displayed on the television screen.
Instead of using the Skip function you can also enter the title
from within the film on the inserted DVD/VCD/S-VCD direct
by entering the title number via the number buttons 0 to 9 on
the remote control.
For this...
• During playback or while playback is stopped press the
number button, corresponding to the title number, on the
remote control, for example the "3" button for the third
title or "1" followed by "0" for the tenth title. The numbers
entered will be briefly superimposed on the television
screen.
• Then press the "OK" button on the remote control.
Playback of the title with the entered number will now
automatically begin.
Search function
You can also use the search function to select a title or chapter
from the inserted DVD/VCD/S-VCD directly:
Direct chapter or time selection via the Search function
NOTE:
These functions may not be available on all DVDs/VCDs/S-VCDs!
If you attempt to execute a function that is not available, the
symbol is displayed on the television screen.
KH 6515/6516
To Next Page
Loading...
