SLM 5 A1
■ 54
│
GB
│
IE
♦ Briefly press the
button on the first speaker that you want to
use as the left speaker. You will hear a beep and the TWS LED
flashes green rapidly during pairing.
♦ Press the
button on the second speaker briefly.
♦ If the pairing of the two speakers has been successful, you will
hear a short beep. TWS mode is activated.
♦ The TWS LED
on the left speaker lights up green.
♦ The TWS LED
on the right speaker flashes green.
♦ Pair the left speaker with a Bluetooth
®
device.
♦ Start playback on the Bluetooth
®
device.
NOTE
► If you do not pair the two speakers within 6 minutes, the speakers
will turn off automatically. In this case, you will have to switch
the speakers back on again before restarting the pairing
process.
► Make sure you position the left and right speakers correctly for
playback.
► The playback buttons work on both speakers.
To Next Page
Loading...
