Silvercrest PMR SPMR 8000 A1 User Manual

SilverCrest SPMR 8000 A1
116 - English
Chronometer
The SilverCrest SPMR 8000 A1 includes a chronometer function for time measurement. The chronometer
can count to 59’59’’99.
 Press and hold the Call
button [4] for three seconds to activate the
chronometer. The chronometer appears on the display.
 Press the Up  button [9] to start time measurement.
 Press the Up  button [9] to stop time measurement.
 Press the Down  button [6] to reset time measurement.
 Press and hold the Call
button [4] for three seconds to exit the chronometer.
The chronometer is not available while channel monitoring is enabled.
Display backlight
The PMR display [1] has a backlight to facilitate operating the device in darkness. The backlight will
switch on automatically when pressing any button except the PTT button [11] and the Call
button [4].
The On/Off
button [10] activates the backlight only when powering the unit on.
The backlight will switch off automatically after six seconds.

Silvercrest PMR SPMR 8000 A1 Specifications

General

Brand	Silvercrest
Model	PMR SPMR 8000 A1
Category	Two-Way Radio
Language	English