10
GB
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
10. Troubleshooting
If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
~ Do not attempt to repair the device your-
self under any circumstances.
11. Technical
specifications
Subject to technical modification.
Fault
Possible causes /
Action
No function
• Has the device been
connected to the pow-
er supply?
• Check the connection.
• Has the blender
jug|5/6 been en-
gaged properly?
• Has the overheating
protection switched off
the device? (see
“Overheating protec-
tion” on page 8)
Blade of the
blade attach-
ment|7/8 not
turning or turn-
ing with diffi-
culty
• Switch off immediate-
ly, pull out mains
plug|
4
and check:
Is there any obstacle in
the blender jug|
5
/
6
?
Liquids are run-
ning out
• Is the quantity of ingre-
dients filled into the
blender jug too large?
Model: SSMP 900 B1
Mains voltage: 220 – 240 V ~ 50/60 Hz
Protection
class: I
Power rating: Max. 900 W
Max. continuous
operation (KB):
1 minute
Filling volume: 150 ml – 700 ml
To Next Page
Loading...
