Silvercrest SADP 4 A1 - Charging the Tracker Battery; Battery Charging Procedure; Battery Life and Usage

SADP 4 A1
GB
│
IE
│
NI
│
7 ■
♦ Activate the Bluetooth
®
connection on your tracker. Proceed as follows:
1. Press the menu button
before first use for about 7 seconds to activate the
display .
2. Press the menu button
twice more. The pedometer mode is displayed.
3. Press and hold the menu button
for about 3 seconds. appears on
the display . The Bluetooth
®
connection is activated.
♦ Open the SilverCrest SmartActive app. The startup screen appears, followed by
the user profile.
NOTE
►
The data that you store in your user profile must be collected so that the entire range
of functions of your tracker deliver the correct results, such as the heart rate mode.
♦ Set up your user profile and confirm your entries. Now all Bluetooth
®
devices in
range are displayed.
♦ Select the entry SADP 4 A1. The tracker vibrates and is now connected with the
SilverCrest SmartActive app.
Putting on the tracker
NOTE
► We recommend that right-handers wear the tracker on their left wrist and left-handers
on their right wrist.
♦ Place the tracker on your wrist and close the strap (see fig. 2). The sensor
for
optical pulse measurement requires skin contact.
♦ Make sure that the sensor for optical pulse measurement lies centrally on your
wrist
(see fig. 3).
Fig. 2 Fig. 3