Silvercrest SADP 4 A1 - Connecting to Your Smartphone; Downloading the SmartActive App; Pairing the Tracker via Bluetooth

SADP 4 A1
■ 8
│
GB
│
IE
│
NI
Handling and use
Waterproofing
In the following table you can see which situations you can use the tracker in.
Situation Use
Rain shower Yes
Washing hands Yes
Showering No
Bathing/swimming No
Water sports (e.g. diving) No
Power-saving mode
The display switches off after around 10 seconds if not in use.
♦ Press the menu button
to reactivate the display .
Airplane mode
♦ Deactivate the Bluetooth
®
connection on your tracker to switch it to airplane
mode. Proceed as follows:
1. Briefly press the menu button
twice. The pedometer mode is displayed.
2. Press and hold the menu button
for about 3 seconds. The display now
shows . The Bluetooth
®
connection is activated.
3. Briefly press the menu button
. The display now shows . The Bluetooth
®
connection is now deactivated and the tracker is in airplane mode.
Storing data
The tracker stores all measurement data for 14 days. As soon as you open the
SilverCrest SmartActive app, the tracker syncs with the app. The data is then automati-
cally saved in the SilverCrest SmartActive app.