SADP 4 A1
■ 20
│
GB
│
IE
│
NI
Appendix
Technical data
Operating voltage/current 5 V , 100 mA via USB charging port
Bluetooth
®
specification Version 4.0 (range of up to 10 metres)
Supported Bluetooth
®
profiles
BLE (Bluetooth
®
Low Energy)*
*if supported by the smartphone
Integrated battery 3.7 V, 150 mAh (lithium-polymer)
Operating time
Operating time with a full charge:
► approx. 2 weeks if heart rate
measurement not used
► approx. 1 week if heart rate measure-
ment used for 1 hour per day
► approx. 8 hours if heart rate measure-
ment is constantly recording
The running time can vary depending on
the frequency of usage.
Charging time approx. 3 hrs
Protection class IP 67
Working temperature +5°C to +40°C
Storage temperature 0°C to +45°C
Humidity (no condensation) 5 to 70%
Dimensions (W x H x D) approx. 26 x 1.1 x 2.3 cm
Weight approx. 25 g
Notes on the EU Declaration of Conformity
This device complies with the essential requirements and other relevant
provisions of the R&TTE Directive 1999/5/EC and the RoHS Directive
2011/65/EU.
The complete EU Declaration of Conformity is available from the importer.
To Next Page
Loading...