SADP 4 A1
US - EN │ 7 ■
Charging the battery
Before using the tracker, the integrated battery must be completely charged.
Before charging, dry the charging contacts , with a cloth to avoid corrosion.
♦ Connect the USB plug on the charger cable to a PC or to a USB
power supply.
♦ Connect the charging contact on the charger cable with the charging
contact on the tracker. This is only possible in one position (see fig. 1).
Fig. 1
▯ During the charging process, the display appears. The menu button is
inactive during charging.
▯ Charging takes about 3 hours on a standard USB connection.
▯ As soon as the tracker is fully charged, appears on the display.
Operating time with a full charge:
▯ approx. 2 weeks if heart rate measurement is not used
▯ approx. 1 week if heart rate measurement is used for 1 hour per day
▯ approx. 8 hours if heart rate measurement is constantly recording
The running time can vary depending on the frequency of usage.
When the battery is empty,
appears on the display.
To Next Page
Loading...