EasyManua.ls Logo

Silvercrest SADP 4 A1 - Device Care and Disposal; Cleaning and Maintenance; Storage and End-of-Life Disposal

Silvercrest SADP 4 A1
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SADP 4 A1
22 US - EN
Cleaning
Keep the charging contacts , dry to prevent corrosion. To do this, wipe
the tracker with a dry cloth after every contact with water.
To avoid irreparable damage to the device, ensure that no moisture pen-
etrates the device during cleaning.
Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the device.
Clean the housing of the device with a slightly damp cloth and a mild
detergent only.
Storage when not in use
Store the device in a location which is clean, dry, dust-free and not in
direct sunlight.
To ensure long battery life, charge the battery at regular intervals.
Disposal
Electronic devices may not be thrown away as part of normal household trash.
If you can no longer use your electronic device, dispose of it in accordance
with the legal provisions applicable in your state. This will allow you to ensure
that old electronic devices are recycled and environmental pollution is kept to
a minimum. Further information about disposal is available on the Internet at
www.epa.gov.

Table of Contents

Other manuals for Silvercrest SADP 4 A1