Silvercrest SBKG 40 A1 - Bluetooth Connection Management

US-EN
│
19 ■
SBKG 40 A1
♦ To terminate the Bluetooth
®
connection, either disable
the Bluetooth
®
function on the Bluetooth
®
playback
device or hold down the Bluetooth
®
pairing button 8
for about 2 seconds until the LED indicator 6 flashes
blue. The headphones are now in pairing mode again.
♦ Alternatively, turn the headphones off as described above
to deactivate the Bluetooth
®
function.
► The next time you turn on the headphones, they will auto-
matically connect to the last Bluetooth
®
playback device
that was connected. If your Bluetooth
®
playback device
does not automatically reconnect to the headphones, you
will have to re-establish the connection manually. A detailed
description of how to do this can be found in the operating
instructions of your Bluetooth
®
playback device.
► If no Bluetooth
®
connection can be established within
10 minutes, pairing mode ends and the headphones turn
off automatically.
► If there is an existing Bluetooth
®
connection but no
music playback within 10 minutes, the headphones turn
off automatically.
► Ensure that the headphones are no more than 10 meters
(10.9 yards) away from the Bluetooth
®
playback de-
vice. Make sure that no barriers or electronic devices are
placed between them.
IB_398448_SBKG40A1_LB9.indb 19IB_398448_SBKG40A1_LB9.indb 19 28.10.2021 11:03:2728.10.2021 11:03:27