Silvercrest SBKG 40 A1 - Music Playback via AUX IN

US-EN
│
23 ■
SBKG 40 A1
Music playback via AUX IN
You can use the supplied audio cable w to connect the
headphones to non-Bluetooth
®
-compatible playback
devices. In AUX IN mode, the headphones behave like wired
headphones and can even be used with an empty battery.
The Bluetooth
®
function is deactivated and the buttons on
the headphones do not function.
♦ Make sure that the headphones are turned off.
♦ Connect the audio cable w to the AUX IN socket 0 of the
headphones.
♦ Connect the audio cable w to the audio output (e.g.
headphone jack) on the playback device.
♦ Turn on the playback device and set the volume to mini-
mum.
♦ Put on the headphones as described in the section
Wearing the headphones.
♦ Set the desired volume on the playback device.
IB_398448_SBKG40A1_LB9.indb 23IB_398448_SBKG40A1_LB9.indb 23 28.10.2021 11:03:2728.10.2021 11:03:27