Silvercrest SBKG 40 A1 - Wearing and Adjusting Headphones; Bluetooth Pairing Procedure

■ 18
│
US-EN
SBKG 40 A1
Wearing the headphones
♦ When you are putting the headphones on, please note
the markings “R” (right) and “L” (left) on the inside of the
adjustable headband 1.
♦ Adjust the headband 1 so that it fits your head comfort-
ably and the earpieces 2 cover your ears.
Pairing/unpairing the headphones with a
Bluetooth
®
device
Before you can use the headphones with the Bluetooth
®
function, you must pair them with a compatible Bluetooth
®
device.
♦ Turn on the headphones as described above to activate
pairing mode.
♦ Set the Bluetooth
®
playback device so that it scans for
Bluetooth
®
devices. A detailed description of how to
do this can be found in the operating instructions of your
Bluetooth
®
playback device.
♦ Select the entry SBKG 40 A1 from the list of devices
found on your Bluetooth
®
playback device and, if
required, enter the code 0000 to connect the two devices.
If the pairing is successful, you will hear a series of beeps
and the LED indicator 6 will flash blue every 5seconds.
IB_398448_SBKG40A1_LB9.indb 18IB_398448_SBKG40A1_LB9.indb 18 28.10.2021 11:03:2728.10.2021 11:03:27