Silvercrest SBLL 56 A1 - Handling and use; Switching the speakers on;off; Pairing the speaker with a Bluetooth music device

SBLL 56 A1
■ 32 │ GB
│
IE
Handling and use
This section provides you with important informa-
tion on handling and using the device.
Switching the speakers on/off
♦ Press and hold the button for about 2
seconds to turn the speaker on and activate
the Bluetooth
®
function. You will hear a
beep and the operating/charging LED
flashes alternately blue and orange. The
light surface illuminates.
♦ Press and hold the button for about
2 seconds to turn the speaker off and deacti-
vate the Bluetooth
®
function. You will hear
a beep. The operating/charging LED
will
go out.
Pairing the speaker with a
Bluetooth
®
music device
Before you can use the speaker, you must pair it
with a compatible Bluetooth
®
device.
♦ Ensure that the speaker is switched off and
the Bluetooth
®
device is switched on.
♦ Set the Bluetooth
®
device so that it scans
for other Bluetooth
®
devices.
A detailed description of how to do this can
be found in the operating instructions for
your Bluetooth
®
device.
♦ Press and hold the
button for about 2
seconds to turn the speaker on and activate
the Bluetooth
®
function. You will hear a
beep and the operating/charging LED
flashes blue and orange.