Silvercrest SBLL 56 A1 - AUX in Mode

SBLL 56 A1
■ 36 │ GB
│
IE
AUX IN mode
You can also listen to music from a portable audio
device connected via the 3.5mm jack cable .
♦ Ensure that the speaker is switched off.
♦ Use the 3.5mm jack cable
to connect
the audio device to the 3.5mm jack socket
(AUX) of the speaker.
♦ Press and hold the
button for about
2 seconds to turn the speaker on. You will
hear a tone and the operating/charging
LED
lights up blue.
♦ Start playback on the audio device and set
the volume to a moderate level.
♦ Then set the desired volume using the
(
) button or the ( ) button on
the speaker.
♦ Press the
( ) button if you want to
mute the speaker.
NOTE
► If you connect a 3.5mm jack cable to the
speaker during the playback of audio files
via Bluetooth
®
, it will switch playback au-
tomatically to the AUX input. The Bluetooth
®
connection is also stopped if you simply con-
nect a 3.5mm jack cable to the speaker.
► In AUX IN operation the telephone functions
are deactivated. It is also no longer possible
to use
( ) button or the ( ) button
to jump to the next/previous track.