60 GB/IE
Bring the device to room temperature before the meas-
urement.
Attaching the cuff
ATTENTION! The device may only be used in conjunc-
tion with the original cuff provided. The cuff is suitable
for an arm circumference between 22 and 36 cm.
Place the cuff
1
on a bare upper left arm (Fig. D). The
blood flow of the arm should not be constricted by
clothing which is too tight, etc.
The cuff
1
should be placed on the upper arm in such
a way that the lower edge lies 2–3 cm over the crook
of the arm and the artery. The cuff tubing
2
points to
the centre of the palm.
Place the free end of the cuff
1
closely, but not too
tightly, around the arm and close the Velcro strip. The
cuff
1
should not be too tight (Fig. E). Check that two
fingers can still fit beneath the cuff
1
(Fig. F).
Now insert the cuff tubing
2
with the cuff plug
3
into
the connector (Fig. G).
Adopting the correct posture
Note: Stay still during the measurement process and do not
talk to prevent the measurement result from being falsified.
To Next Page
Loading...
