Silvercrest SBM 68 - Data Transfer and Evaluation; Bluetooth Data Transfer and Result Classification

63 GB/IE
Transferring measurements
via Bluetooth
®
You have the option of transferring the measured values
and values saved on your device to your smartphone using
Bluetooth
®
low energy technology.
Activate Bluetooth
®
in your smartphone settings and
open the „HealthForYou“ app.
Note: The „HealthForYou“ app must be activated for
transfer to occur.
Add „SBM 68“ in the app.
Warning! The displayed values are intended merely as a
visualisation and may not be used as the basis for therapeu-
tic measures. The software is not part of a diagnostic medi-
cal system.
We wish to expressly indicate that the software at hand is
not a medical product in accordance with the EU directive
93/42/EEC.
Note: During data transfer, button functions cannot be
executed.
To transfer measurements to your smartphone via Bluetooth
®
proceed as follows:
Manual transfer
Go to save mode (see „Saving, requesting and deleting
measurements“). As soon as the average value of all meas-
urements is displayed, a Bluetooth
®
connection will auto-
matically be established. The data will be transferred and
the Bluetooth
®
symbol will be shown on the display.