Silvercrest SBM 68 - Page 67

67 GB/IE
measurement values, the oldest measurement value will be
overwritten.
Press the SET button
6
. Press the function buttons -/+
7
to select the desired user memory ... . Confirm
your choice using the START / STOP button
8
.
Press the memory button M
5
to display the average
value „A“ of all saved measurements pertaining to the
user memory. Press the memory button M
5
again to
display the average value of the last 7 days for the
morning measurement. (Morning: 5.00 am – 9.00 am,
display „AM“). Press the memory button M
5
again
to display the average value of the last 7 days for the
evening measurement. (Evening: 6 pm – 8 pm, display
„PM“). By pressing the memory button M again, the
last individual measurement will be displayed with the
date and time.
Press the START / STOP button
8
to switch off the
device.
Note: The device switches off automatically after one
minute when no button has been pressed.
Deleting data
Press the memory button M
5
to delete the entire
memory of the respective user.
Wait until the Bluetooth
®
symbol no longer flashes. Keep
the function buttons -/+
7
pressed simultaneously for
5 seconds. After successful deletion the „CL 00“ will
appear in the display.
The data has been deleted.