SBTF 10 C3
■ 12
│
GB
│
IE
│
NI
Note:
The sound quality of the hands-free set is heavily depend-
ent on where it is installed. Where possible, set up your
hands-free set so that the microphone is pointing in
your direction.
Call function
Ɣ Use your mobile telephone in the usual way to make a call.
Ɣ For redialing of the last number called, shortly press
the multi-function button twice.
Ɣ For activation of voice dialling, shortly press the multi-
function button once.
Note:
Voice dialing is only available with mobile telephones that
support this function. Further information regarding voice
dialing is to be found in the operating instructions for your
mobile telephone.
Accepting and ending a call
When you receive a call the LED status indicator blinks
and you hear a call tone from the hands-free appliance.
If the call signal in your mobile phone is switched off, the
ringing tone is nonetheless sounded via the hands-free
appliance.
Ɣ Press the multi-function button shortly once,
to accept the call.
Ɣ Press the multi-function button shortly once,
to terminate the accepted call.
You can also accept and terminate the call over the
mobile telephone.
To Next Page
Loading...
