Silvercrest SCAA 5.00 A1 - Setting the Video Resolution

SilverCrest SCAA 5.00 A1
English - 103
Setting the video resolution
To set the video resolution, proceed as follows:
 Press the On/Off/Mode button [2] multiple times to select the SETUP menu and then
press the record button [9] to confirm.
 The VIDEO menu will be highlighted. Press the record button [9] to open the VIDEO
menu.

 Press the On/Off/Mode button [2] to select an option. The following settings are
available:

1080p – 1920 x 1080 (30 fps)
960p – 1280 x 960 (30 fps)
720p – 1280 x 720 (60 fps)
 Press the record button [9] to confirm your selection.
 To exit the SETUP menu, press the On/Off/Mode button [2] multiple times until the EXIT
item is highlighted and then press the record button [9] to confirm.