Silvercrest SCAA 5.00 A1 - Customising the Display Brightness

SilverCrest SCAA 5.00 A1
English - 111
Customising the display brightness
This menu allows you to customise the display brightness. Proceed as follows:
 Press the On/Off/Mode button [2] multiple times to select the MORE menu and then
press the record button [9] to confirm.
 Press the On/Off/Mode button [2] multiple times until the BRIGHT menu is highlighted.
Press the record button [9] to open the BRIGHT menu.

 Press the On/Off/Mode button [2] to select an option. The following settings are
available: “100 %“, “60 %“ and “30 %“.
You can adjust the display brightness in
three levels (100 % = bright to 30 % =
dark).
 Press the record button [9] to confirm your selection.
 To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT
item is highlighted and then press the record button [9] to confirm.