Silvercrest SCAA 5.00 A1 - Toggling the Status Leds On;Off

SilverCrest SCAA 5.00 A1
110 - English
Toggling the status LEDs on/off
This menu allows you to enable or disable the camcorder’s status LEDs. Proceed as follows:
 Press the On/Off/Mode button [2] multiple times to select the MORE menu and then
press the record button [9] to confirm.
 Press the On/Off/Mode button [2] multiple times until the LED menu is highlighted. Press
the record button [9] to open the LED menu.

 Press the On/Off/Mode button [2] to select an option. The following settings are
available: “ON“ and “OFF“.
Selecting “ON” will enable the camcorder’s
status LEDs and selecting “OFF” will disable
them.
 Press the record button [9] to confirm your selection.
 To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT
item is highlighted and then press the record button [9] to confirm.