Silvercrest SDBB 2400 A1 User Manual

SDBB 2400 A1
■ 8
│
GB
│
IE
ATTENTION! PROPERTY DAMAGE!
► Fill the water tank only with tap water or distilled water. Otherwise, you will
damage the steam iron.
1) Make sure that the
temperature control 6 is set to the position min.
2) Hold the iron in your hand at an angle and open the lid of the filler opening
for the water tank
2.
3) Use the measuring cup
w to fill the water tank 2 up to no more than
the MAX marking (see fig. 1).
Fig. 1
4) Close the cover of the filler opening for the water tank 2.
NOTE
► If the mains water in your location is rated as hard, we recommend that
you mix the mains water with some distilled water. Otherwise, the jets for
the steam blast function could become blocked with limescale prematurely.
To extend the optimal steam blast function, mix mains water with distilled
water according to the table.
► Ask your local water utility about the water hardness in your area.
Water hardness Ratio of distilled water to tap water
very soft/soft 0
medium 1 : 1
hard 2 : 1
very hard 3 : 1

Silvercrest SDBB 2400 A1 Specifications

General

Brand	Silvercrest
Model	SDBB 2400 A1
Category	Iron
Language	English