SDBB 2400 A1
■ 12
│
GB
│
IE
Tips for energy-saving ironing
■ Iron once a week rather than every day. This reduces the amount of energy
required, as you only need to heat up the iron once.
■ Pre-sort the washing: first iron the washing that requires a low temperature.
You will find the temperature recommendation for ironing on the care label
of the laundry items.
■ Steam is not always necessary. Many items of laundry can be ironed flat
even without a steam blast.
■ Clean and descale the iron regularly so that the nozzles do not become
clogged. If the nozzles become clogged, ironing takes a great deal more
time and energy.
Cleaning
RISK OF ELECTROCUTION!
► Before cleaning, always disconnect the mains plug from the mains socket
(except when using the self-cleaning function).
There is a risk of electric shock!
RISK OF INJURY!
► Allow the appliance to cool down before cleaning it. Otherwise, there is
risk of burns!
Cleaning the housing and soleplate
ATTENTION! PROPERTY DAMAGE!
► Do not use abrasive, aggressive or chemical cleaning agents. They can
damage the surface and also lead to irreparable damage to the appliance.
■ Clean the housing with a soft, dry cloth only.
■ Clean the soleplate
0 using a damp cloth and a mild, non-scouring deter-
gent.
Self-cleaning function
1) Fill the water tank to the MAX marking.
2) Insert the plug into the mains power socket.
3) Set the temperature control
6 to the max setting.
4) Set the steam control 3 to the highest level .
5) Allow the steam iron to heat up until the control lamp 7 lights up perma-
nently.
6) Hold the steam iron horizontally over a sink or suitable container.
To Next Page
Loading...
Need help?
General
