Silvercrest SDM 1500 C2 - Troubleshooting Common Issues; Diagnosing and Resolving Problems

GB
│
IE
│
NI
│
13 ■
SDM 1500 C2
Troubleshooting
Programme Possible causes Possible solutions
The appliance is
not working.
The plug is not connected.
Connect the appliance to a
mains power socket.
The appliance
produces no steam.
The "Steam" button r has
not been pressed.
Press the "Steam" button r.
There is no water in the
water tank 8.
Fill the water tank 8 with
tap water.
The fi lter 7 is blocked. Change the fi lter 7.
No steam setting has
been selected.
Use the MODE button e to
select the desired level of steam.
The pump makes
unusually loud
noises.
There is no water in the
water tank 8.
Fill the water tank 8 with
tap water.
A whitish edge
forms on the fl oor
when the appliance
stops briefl y during
operation.
Lime has collected.
Wipe the limescale away with a
damp cloth. If necessary, add a
little descaler onto the cloth.