12 GB
Accessory
Function
Angle nozzle
14
For precision cleaning of
items with hard-to-reach areas
(faucets, sinks, etc.).
Extension
nozzle
15
Useful for hard-to-reach areas.
Round brush
16
For scrubbing especially tough
stains. Ideal to use on ceramic
tile, grouting, and other similar
surfaces.
Assembly
(Fig. B)
Accessory
Assembly
Puller
8
Fit the hooks (at the back
of the puller
8
) into the
slots of the upholstery
nozzle
9
.
Press the puller
8
against
the upholstery nozzle
9
until locked.
Cotton cover
10
Fix on the upholstery
nozzle
9
.
Upholstery
nozzle
9
Attach the intake to
the steam outlet
1
of
the product/extension
hose
12
.
Screw in a clockwise
direction until tight.
Extension
hose
12
Extension
nozzle
15
Angle nozzle
14
Attach the intake to
the steam outlet
1
of
the product, extension
hose
12
or extension
nozzle
15
.
Round brush
16
Dismount all the accessories in a reverse order.
NOTE – Dismounting the puller
8
: Unlock the
clip first.
Operation
Filling the water tank
mDANGER! Risk of electric shock! Before
filling the water tank
2
: Disconnect the power
plug
7
from the mains socket.
mCAUTION! Fill the water tank
2
with tap water
or distilled water without any additives.
If your tap water is hard: Use distilled water.
If your tap water is moderately hard: Mix distilled
water and tap water (ratio of 1:1).
NOTES:
As long as there are steam and pressure in
the water tank
2
you cannot open the safety
valve
3
. To open the water tank:
– Release steam or
– wait until the product has cooled down.
Do not exceed the water tank’s
2
maximum fill
capacity of 250 ml.
Slowly open the safety valve
3
. Before fully
opening, wait a few seconds until the steam stops
hissing.
Use the measuring cup
13
and the funnel
11
to
fill the water tank
2
through the water inlet
2
.
Close the safety valve
3
.
Turning on/off
Connect the power plug
7
to a suitable mains
socket.
The power indicator
18
lights up. The product
starts to produce steam immediately.
The product is ready to use when the steam
indicator
17
lights up.
Turning off the product: Disconnect the product
from the mains socket.
To Next Page
Loading...
