Silvercrest SFA 4.1 D1 - Maintenance and Cleaning; Device Maintenance; Cleaning Procedures

SilverCrest SFA 4.1 D1
English - 45
9.12 LED indicators
Refer to the table below for the meaning of the different LED indicators:
Indicator Meaning
Buttons 1, 2, 7 and 8 each flash blue briefly three
times twice in succession.
Power-on procedure
Button 2 alternates between flashing blue and orange Pairing
Buttons 1, 2, 7 and 8 flash blue twice every 3 seconds Standby mode (Bluetooth
®
connection not established)
Buttons 1, 2, 7 and 8 flash blue once every 3 seconds Standby mode (Bluetooth
®
connection established)
Buttons 1, 2, 7 and 8 flash blue once every 5 seconds Active call
Buttons 1, 2, 7 and 8 rapidly flash blue (a ringtone
also sounds for an incoming call)
Incoming or outgoing call
Button 2 flashes orange once (2 beeps sound at
regular intervals)
Muting of the microphone is active
The multi-function button lights up green continuously Charging
Button 2 flashes orange 5 times Power-off procedure
Button 2 flashes orange four times every 5 minutes Battery charge level is low
All buttons off Energy saving mode active