SilverCrest SFA 4.1 D1
46 - English
9.13 Storing the device when not in use
If the device is not going to be used for a long period of time, you should recharge the
battery on a regular basis. This helps maintain battery performance. Keep the device in a
dry, clean and cool place.
9.14 Restore factory settings
You can restore the hands-free kit to its factory settings. Doing so will delete the list of connected devices in the hands-
free kit.
Proceed as follows:
Hold down the multi-function button (8) and the - button (7) simultaneously for approx. 5 seconds until two beeps
sound.
Press the multi-function button (8) to switch the hands-free kit off and complete the procedure.
Next time you switch on the hands-free kit it starts directly in pairing mode and the mute button (2) alternates between
flashing blue and orange.
To Next Page
Loading...
