19 GB/IE/NI
Switch off the product using the ON / OFF button
4
.
Connect the connector plug
13
to the power socket
12
on the product.
Plug the power adapter
14
into an easy to access mains socket
with the voltage indicated in the type plate.
During the charging process, the plug symbol
9
and the battery
symbol
8
will light up, and the status is shown by the battery
level
7
. When the battery is fully charged, the display
6
will
show 100% and the plug symbol
9
will no longer be lit up.
Before first use
DANGER OF ELECTRIC SHOCK! The hair and
beard trimmer and the power adapter are not waterproof and
therefore must not be used in the bathtub / shower.
Please do not use the product if you have an open wound, cut,
sunburn or blister.
The product is only intended for use on dry hair in dry, indoor
spaces.
The product can be powered using a rechargeable battery or a
power adapter.
Note: If the product stops working whilst in use due to an empty
or inefficient rechargeable battery, you can continue trimming by
connecting the power adapter
14
.
Using the product with the power adapter
Switch the product off using the ON / OFF button
4
before
switching to the mains power supply.
Connect the connector plug
13
to the power socket
12
on the
product.
To Next Page
Loading...
