Silvercrest SHBS 800 A1 - Cleaning and Care; Cleaning with Brush; Cleaning with Water

24 GB/IE/NI
Do not use aggressive or abrasive cleaning agents.
Wipe down the product with a slightly damp cloth.
If you are not using the product for extended periods, store it in
the storage bag
17
.
Cleaning with the cleaning brush
Switch the product off using the ON / OFF button
4
. If precision
attachment
15
or comb attachment
16
is attached on the
product, remove it before cleaning as described in the chapter
“Changing the attachments“. Open the cutting unit
1
by pressing
the trimmer with your thumbs from the front (see Fig. F).
Use the cleaning brush
18
to clean the cutting unit
1
and the
area behind the cutting unit
1
(inside the housing).
Cleaning with running water
Switch the product off using the ON / OFF button
4
and unplug
the power adapter
14
from the socket if necessary. If precision at-
tachment
15
or comb attachment
16
is attached on the product,
remove it before cleaning as described in the chapter “Changing
the attachments“.
Wash the cutting unit
1
and the attachments
15
,
16
under
running water.
Allow all parts to dry thoroughly.
Use the enclosed cleaning brush
18
to remove any remaining hair
trimmings from the cutting unit
1
.