Silvercrest SHD 7.4 A1 - Appliance Description and Initial Setup; Component Identification; Initial Battery Charging Requirement

SHD 7.4 A1
■ 8
│
GB
│
IE
│
NI
│
CY
Appliance description
(See fold-out page for illustrations)
1 Cap (with stand function)
2 Suction opening
3 Dirt container
4 Filter housing
5 Dust filter
6 Charge indicator lamp (blue)
7 On/Off switch
8 Charging socket (on the underside of the appliance)
9 Handle
0 Barrel plug
q Mains adapter (with mains plug and mains cable)
w 2-in-1 suction nozzle (brush nozzle/crevice tool)
NOTE
► This appliance is supplied with non-charged batteries. Charge
the batteries completely before using the appliance for the first
time (see section Charging the batteries).