Silvercrest SHD 7.4 A1 - Cleaning and Changing the Dust Filter

SHD 7.4 A1
GB
│
IE
│
NI
│
CY
│
19 ■
Cleaning/changing the dust filter
NOTE
► Change the dust filter
5 regularly to ensure proper and
hygienic operation of the appliance.
► Information on ordering replacement filters can be found in the
section Ordering replacement parts.
1. Remove the dust filter
5 with the filter housing 4 from the dirt
container 3 (see section Emptying the dirt container).
2. Note the lock symbols on the lid of the dust filter
5. Turn the dust
filter 5 to the right (in the direction of the symbol) and pull it
out of the filter housing 4 (see Figs. 9 and 10).
Fig. 9 Fig. 10
NOTE
► If you want to change the dust filter
5, skip steps 3 and 4.
Go directly to step 5.