11
US-EN
6. How to use
• Remove all packing material.
• Check that the delivery is complete.
6.1 Power supply
NOTICE: risk of material damage
~ Be sure to observe the correct polarity when inserting the
batteries.
1. Slide the battery compartment lid|7 off the housing|5.
2. If necessary, replace the old batteries with new ones.
3. Slide the battery compartment lid|7 back on to the hous-
ing|5.
6.2 Removal and attachment of roller
holder
Removal
• Press the button|6 and remove the roller holder|2 upwards.
Attachment
1. Figure A: place the roller holder|2 on the top of the device
in such a way, that the cog wheels of the roller and the
device are above one another.
2. Press the roller holder|2 on to the device until it engages
audibly.
3. Check that it is secure.
__NAS279064_Hornhautentferner_B9.book Seite 11 Donnerstag, 15. Dezember 2016 4:00 16
To Next Page
Loading...
