EasyManua.ls Logo

Silvercrest SHE 3 C3 - How to Use the Device; Power Supply and Battery Management; Roller Holder Attachment and Removal

Silvercrest SHE 3 C3
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
US-EN
7. Operation
Two complete rollers|1/8 with roller holders|2 are supplied.
They have different grains.
The coarser grain (turquoise roller|
8
) is for use on thick calluses.
The finer grain (purple roller|1) also removes calluses, but
also smoothes them. This roller is especially suitable for
smoothing after having used the coarser roller|8.
Risk of injury and skin irritation
~ Exert only light pressure. Do not treat one spot longer than 2-
3 seconds. If too much pressure is exerted or if the treatment
duration is too long, this can lead to skin injuries.
7.1 Application
Make sure the skin is dry.
It is imperative that the skin is taut.
Stop the treatment immediately in case of pain.
Lay a blanket or towel down, on which the removed cal-
loused skin can fall.
1. Expose the parts from which the calluses are to be removed.
2. Press the safety button|4 down and then press the slide
switch|3 up. The roller|1/8 starts to rotate.
3. Apply the rotating roller slowly and carefully to the callus,
which is to be removed.
4. Apply the roller|1/8 to the callus with only a little pressure.
5. To switch off the device, slide the button|3 down.
CAUTION
__NAS279064_Hornhautentferner_B9.book Seite 12 Donnerstag, 15. Dezember 2016 4:00 16

Related product manuals