EasyManuals Logo

Silvercrest SHF 1650 A1 User Manual And Service Information

Silvercrest SHF 1650 A1
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #68 background imageLoading...
Page #68 background image
SilverCrest SHF 1650 A1
66 - English
The air fryer then switches itself on. The power LED (5) lights up in operating mode. Once the
set temperature is reached, the temperature control LED (3) also lights up.
The air fryer switches off automatically upon expiry of the time indicated by the timer (4). A
beep sounds once the timer (4) has reached the "OFF" position. You can also manually turn the
timer (4) back to the "OFF" position to switch off the air fryer directly.
Then remove your food by lifting up the pan (7) by the handle (9).
There is a risk of burns! Do not touch the pan (7), basket (6)
or the inside of the air fryer directly.
Place the pan (7) on a flat, heat-resistant surface.
Then press the release button (8) to detach the basket (6) from the pan (7). Now place the
food in a bowl or on a plate.
After using the air fryer, turn the thermostat (1) back to the "OFF" position and remove the
mains plug from the socket.
Clean the air fryer as described in the section "Cleaning".
Some food should be shaken halfway through the cooking time to ensure that it is cooked
evenly. To do so, lift the pan (7) and basket (6) by the handle (9) from the air fryer and shake
the food. Then reinsert the pan (7) and basket (6) into the air fryer. The air fryer switches itself
off automatically when you remove the pan (7) and basket (6). Once the pan (7) and basket
(6) are correctly reinserted, the air fryer switches itself on again automatically until the timer
(4) expires.
If you are cooking food that should be shaken halfway through the cooking time, you can also
set the timer (4) to half the cooking time. Thus a beep sounds when you need to shake the
food. After shaking the food, set the timer (4) to the remaining cooking time to complete the
full cooking time.
You can also preheat the air fryer without food. The set temperature has been reached when
the temperature control LED (3) lights up.
If the food is not fully cooked after the specified cooking time, reinsert the pan (7) and basket
(6) correctly into the air fryer. Then set the timer (4) to a few extra minutes.
Place the food in a bowl or on a plate if you have already detached the pan (7) from the
basket (6). Otherwise, the excess oil that has collected in the pan (7) will be poured over the
food.

Table of Contents

Other manuals for Silvercrest SHF 1650 A1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Silvercrest SHF 1650 A1 and is the answer not in the manual?

Silvercrest SHF 1650 A1 Specifications

General IconGeneral
BrandSilvercrest
ModelSHF 1650 A1
CategoryFryer
LanguageEnglish

Related product manuals